Corner Notching Machine Repair / Breakdown / Servicing & Support

JPS Machinery boast the Largest Dealer Service Team in the UK and can cater for all new & used corner notching machinery through our in house service team.

corner notching machine

Typical Corner Notcher Service Requirements:

At the beginning of the work shift, inspect the Corner Notching Machine a visual inspection of all areas will allow you to notice and address small issues before they become significant problems

It is important to understand the function, design, and operation of your Corner Notching Machine

The operators role in service / maintenance of a Corner Notching Machine is a major part of keeping the equipment running efficiently. It is important to immediately investigate strange noises, vibrations, or something that doesn’t look right. The quicker problems are detected and corrected, can often mean a less expensive fix.

 it’s the small preventive measures that keep a Corner Notching Machine up and running.

A daily maintenance check list should include the following

Clean Hydraulic oil is the key to a healthy hydraulic system. Dirt particles may enter the hydraulic tank. Keeping the oil clean and filling the reservoir to capacity are critical, re filter the oil every 6 months using a 10/15 micron filter, completely replace the oil around 2/3000 hours of actual use

But clean the tank and replace the suction filters before replacing the hydraulic oil

Grease all slideways

Check the condition of the cutting blades

If material hold downs are fitted check their operation

Electrical Systems:

Emergency stop buttons, check the circuits relays, look for welding of contactors

Check all terminal strip connections , relays, terminal boxes on motors.

Check all external cables and switches fittings for damage

Clean control cabinet to remove dust particles