It’s a compact tube bender with high performance, equipped with state-of-the-art technologies meant to bend with or without mandrel tubes and profiles, and capable of bending both in the right and left direction using dedicated toolings.
It allows to bend tubes with a range diameter from 8 mm up to 60 x 4 mm and it can make curves over 180° with top finish quality.
The rotary draw bender ETM 60 machine is manufactured from a single steel block and the toolings are machined from solid steel. It can also have the option of fitting a hydraulic vice and positioner.
The system of counter formers is specifically designed to reduce mechanical effort and to make the bending operation faster than other brands of machines of the same category, thus granting a very good finish even when bending very thin wall thicknesses.
ETM SOFTWARE
Every ETM series machine is supplied with the “Digital Bend Programming Touch Screen 2” special software, extremely easy to use due to the intuitive “Touch” screen.
Thanks to the latest generation technologies it is possible to access main features as:
Storage of 49 programs, each of them with an 8-stop sequence in the bending operation
Calculation of the machine's maximum bending capacities concerning the material size to be bent
Graphic of the minimum bending radii
The setting of springiness material estimate (spring back)
Bend counter
Remote connection “Industry 4.0”
Some more functions:
Working mode: either manual or automatic
100 MB hard disk
Alarm diagnosis
Maintenance notice
