Many optional extras
Roller table machine connections available:
Loading side connection+roller
Unloading side connection
Unloading side pull-out roller surface
Standard specification:
Cutting of solid rounds,squares,box,structural sections
Metal cutting bandsaw – swivel mitre bow. ‘Manual’ pull down bow, option of gravity down feed [G]. 2 blade speeds 35/70 m/min, bow handle with integral on/off switch, fast action vice, flood coolant, mounted on a steel cabinet.
Mitre Cutting: 45° & 60° to the right,45° to the left.
cutting capacity @ 0°
Rounds 240mm
Squares 240mm
Rectangles 200 x 280mm
Band saw bow head angle rotation, pre set positive stop(s) @ 0° then 60° to the right, 45° to the left & right, with graduated scale, locking lever
Pull down feed band saw bow, bow head handgrip with integral on/off button
Manual fast material clamping vice
Vice moveable left to right, for loading from either left or right
2 Band saw blade speeds 35m/min or 70m/min – Selector switch
Simple cut length stop 0 to 600mm
Bow head structure cast aluminum alloy
Dynamometric blade tensioning
Blade guide with combined action of side bearings, carbide wear plates and top bearing
Coolant flow to both blade guides.
Blade cleaning brush integrated in the head protection cover
Direct drive reduction gear box, lubricated with long lasting grease
Ergonomic working table and control panel
M42 Band saw Blade 2700mm x 27mm x 0.9mm
Heavy duty fabricated steel base : 20 litre tank & coolant pump in the base.
Electrical cabinet : with 24V AC, main switch, safety unit and electric drives.
Total protection against highest voltage and short circuit current. IP55 Protection level.
Line voltage : 400V/50Hz/3Ph standard.
Machine colours : Yellow RAL 1018 and Grey RAL 7037
To download the FMB ORION product brochure, click on the pdf icon below, or use our contact page to request the FMB brochure.
