Standard specification:
Techna-Fab s440r Horizontal metal cutting bandsaw – swivel mitre bow, gravity down feed, 2 blade speeds 35/70 m/min, flood coolant, mounted on a steel cabinet.
Cutting Capacities @ 0°:
Rounds 440 mm
Squares 440 mm
Rectangles 620 x 440 mm
Mitre Cutting: 45° & 60° to the right.
- Cutting capacity @ 0°
Rounds 440mm – Squares 440mm – Rectangles 620mm x 440mm - Semi-Automatic function metal cutting band saw machine, preset positive stop(s) @ 0°, then
45° & 60° to the right, with graduated scale, locking lever - Hydraulic down feed – bow descent adjustment valve
- Manual fast material clamping vice
- 2 Band saw blade speeds 35m/min or 70m/min, Selector switch
- Infeed side material support roller
- Bowhead structure cast aluminium alloy
- Dynamometric blade tensioning – broken band saw blade sensor, micro switch
- Blade guide with the combined action of side bearings carbide wear plates and top bearing
- Coolant flow to both blade guides
- Blade cleaning brush integrated with the head protection cover
- Direct drive reduction gearbox, lubricated with long-lasting grease
- Ergonomic working table and control panel
Heavy-duty fabricated steel base: with locking door, housing the 20-litre tank & coolant pump in the base, plus a hydraulic unit for the bandsaw bow movements
Electrical cabinet: with 24V AC main switch, safety unit and electric drives.
Total protection against highest voltage and short circuit current. Protection level IP 55
Line voltage: 400V/50Hz/3Ph standard
