Many optional extras
Roller table machine connections available:
Loading side connection+roller
Unloading side connection
Unloading side pull-out roller surface
Standard specification:
Cutting of solid rounds,squares,box,structural sections
Metal cutting bandsaw – straight & swivel bow mitre cutting, gravity down feed [G] – 2 blade speeds 35/70 m/min, bow handle with integral on/off switch, fast action vice, flood coolant, mounted on a steel cabinet.
Cutting Capacities @ 0°:
Rounds 260 mm
Squares 260 mm
Rectangles 260 x 370mm
Mitre Cutting: 45° & 60° to the right.
Cutting capacity @ 0°
Rounds 260mm – Squares 260mm
Rectangles 260mm x 370mm
Band saw bow head angle rotation, pre set positive stop(s) @ 0° then 45° & 60° to the right, with
graduated scale, & locking lever
Gravity bow down feed, with down feed adjustment valve, alternatively pull down bow,
hand grip integral on/off switch
Manual fast material clamping vice
Single material support roller, in feed side
2 Band saw blade speeds 35m/min or 70m/min – Selector switch
Bow head handgrip with integral on/off switch
Simple cut length stop 0 to 600mm
Bow head structure in 3 parts cast aluminum alloy, steel, cast iron
Dynamometric blade tensioning
Blade guide with combined action of side bearings carbide wear plates and top bearing
Coolant flow to both blade guides
Blade cleaning brush integrated in the head protection cover
Direct drive reduction gear box, lubricated with long lasting grease
Ergonomic working table and control panel
M42 Bandsaw Blade : 3300mm x 27mm x 0.9mm
Heavy duty fabricated steel base : 20 litre tank & coolant pump in the base.
Electrical cabinet : with 24V AC, main switch, safety unit and electric drives.
Total protection against highest voltage and short circuit current. IP55 Protection level.
Line voltage : 400V/50Hz/3Ph standard.
Machine colours : Yellow RAL 1018 and Grey RAL 7037
