Many optional extras
Roller table machine connections available:
Loading side connection+roller
Unloading side connection
Unloading side pull-out roller surface
Standard specification:
Cutting of Solid rounds,squares,box,structural sections
Horizontal bandsaw – swivel mitre bow. ‘Manual’ pull down bow, or option of gravity down feed [G]. 2 blade speeds 35/70 m/min, bow handle with integral on/off switch, fast action vice, flood coolant, mounted on a steel cabinet.
Cutting Capacities @ 0°:
Rounds 220 mm
Squares 215 mm
Rectangles 130 x 250 mm
Mitre Cutting: 45° & 60° to the right.
To download the FMB TRITON product brochure, click on the pdf icon below, or use our contact page to request the FMB brochure.
Standard specification at a glance:
Cutting capacity @ 0°
Rounds 240mm
Squares 240mm
Rectangles 210mm x 280mm
Band saw bow head angle rotation, pre set positive stops at 0° then 45° & 60° to the left & right, with graduated scale, locking lever
Pull down bow with hand grip and integral on/off switch
Manual fast material clamping vice
Light duty roller in feed table 1000mm
2 Band saw blade speeds 35m/min or 70m/min – Selector switch
Simple cut length stop 0 to 600mm
Bow head structure cast aluminium alloy
Dynamometric blade tensioning
Blade guide with combined action of side bearings, carbide wear plates and top bearing
Coolant flow to both blade guides.
Direct drive reduction gear box, lubricated with long lasting grease
Ergonomic working table and control panel
M42 Band saw Blade 2450mm x 27mm x 0.9mm
Heavy duty fabricated steel base : 20 litre tank & coolant pump in the base.
Electrical cabinet : with 24V AC, main switch, safety unit and electric drives. Total protection against highest voltage and short circuit current. IP55 Protection level
Line voltage : 400V/50Hz/3Ph standard
Machine colours : Yellow RAL 1018 and Grey RAL 7037
